General adjuster vs. CAT adjuster: what's the difference?

People use "adjuster" like it's one job. It isn't. After a windstorm, you're running at least three different roles, and mixing them up is how a large loss sits untouched for two weeks while a crew burns hours on a torn shingle three streets over.
Staff adjuster, CAT adjuster, general adjuster: not the same license, not the same job
A staff adjuster works for one carrier, full-time, handling whatever comes in through the normal course of business: fender-benders, kitchen fires, the occasional wind claim in a quiet month. Steady caseload, local territory, no deployment bag by the door.
A CAT adjuster (catastrophe adjuster) is built for volume. Independent, on a roster, flown or driven into a declared event to clear claims fast: residential roofs, siding, fences, the bread-and-butter wind and hail file. A good CAT adjuster can close a dozen straightforward claims in a week because the damage pattern is familiar and the scope is small.
A general adjuster (GA) is a different animal entirely. GAs handle large, complex, or high-dollar losses, commercial buildings, multi-million-dollar exposures, claims with coverage disputes or business interruption attached. They're senior, usually carry more authority on reserves, and they move slower on purpose because the file demands it: engineering reports, forensic estimates, sometimes a public adjuster or attorney on the other side. Put a GA on a torn carport and you've wasted a specialist. Put a CAT adjuster alone on a collapsed warehouse roof with a BI claim behind it and you've under-resourced a loss that needed a large loss adjuster from day one.
Why this distinction matters the day after the storm
The mistake happens at triage, not in the field. Right after a windstorm, every claim in the queue looks the same: a FNOL number, an address, "roof damage" typed into a box by whoever took the call. Nothing in that intake tells you which addresses are a missing ridge cap and which ones are a collapsed bay on a 40,000-square-foot distribution center.
A commercial property CAT adjuster can't close that gap by driving around guessing, and that gap is what decides whether your general adjusters get deployed on day two or day nine. Severity should drive assignment. In practice, severity gets guessed at from a windshield survey, a policyholder's cell phone photos, or whoever yells loudest on the claims line. None of those tell you which commercial roof actually failed versus which one just lost a few panels.
This part of the job is solvable before a truck leaves the lot. A per-building damage grade pulled from high-resolution imagery across the whole footprint, run within days of the event, tells you where the real severity is before anyone drives there. That's what the per-building damage grading at the center of this site does, and it's exactly the sort of input that should decide who gets routed where: staff and CAT adjusters to the clustered, lower-severity residential work, general adjusters straight to the commercial and large-loss addresses that show up worst on the grade.
A rough rule of thumb for routing
If the file involves a commercial structure, a BI exposure, coverage questions, or total insured value north of what your CAT roster is authorized to settle, it's a GA file, not a CAT file, and it should get flagged that way before anyone drives past it. If it's a single-family roof, fence, or detached garage with a clean, bounded scope, your CAT roster handles it, and a GA never needs to see it.
The failure mode in most storm responses is sending the wrong level of adjuster to the wrong address because nobody had a severity read before the trucks rolled. Sort that out at intake and your general adjusters spend their first days on the buildings that need them most.
See where your worst-hit commercial addresses are before you send anyone, not after.